The BUF-01 Voltage Buffer is a dual channel buffer capable of driving up to 200 mA of current on each channel at up to ±10 V output. The buffer has a 2nd order low pass filter with 3 dB point of 120 kHz to remove high frequency noise. The unit’s differential inputs are built to withstand high DC over-voltages up to ±50 VDC and greater than ±100 V transients. Gain of the unit is 1 allowing for minimal insertion issues.
Signal Conditioning – Dual Voltage Buffer with Current Drive Module
$495.00
Description
Features
- Dual Fully Independent Channels
- Output drive of 200 mA per Channel
- ±10 V True Differential Inputs
- Lowpass filter to remove high frequency noise
- 24 VDC Powered (9-36 VDC)
- DIN Rail Enclosure
Applications
- Signal Noise Reduction
- Valve Driver
- High Current Drive Output
- Differential to Single-Ended Conversion
Key Specifications Include
- Output: ±10 V with up to 200 mA
- Gain accuracy (G=1, DC Input): ±0.04%
- Voltage offset (G=1): ±3 mV typ ±5.2 mV max
- Differential input with ±50 VDC input protection, 100 kΩ input impedance. 30 GΩ available (consult factory)
- ±10 V output settles in 3 µS to 0.1%
- 24 VDC Powered
BUF-01 Specifications
Input (Channel 1, 2)
Power
|
Filter
The 2nd order filter has a 120 kHz ±10%, 3 dB operating point differential mode, please note that for full scale input voltages the slew rate limits the response before the filtering. Values given with ±0.5 V input, Output load of 1 kΩ. Accuracy
Options
|
