Click to view this message in a browser

Notes from the EditorGraphical System Design Achievement Award

Viewpoint is proud to announce that our paper “Remote Structural Health Assessment of LIRR Railroad Viaduct” has been selected as a winner in the Embedded Monitoring category. This paper was based on work with one of our clients, STRAAM (www.straam.com), which accesses the integrity of infrastructure (bridges, building supports, and so on). STRAAM is developing the embedded monitoring system to collect acceleration data, perform proprietary waveform analysis, and communicate with a centralized server for data uploads and alerts.

There were 130 submissions for 7 categories ranging from Automated Test to Robotics. Information about the GSD Awards can be found at www.ni.com/gsdawards/.

Aerospace Testing Article

Viewpoint is pleased to be published in the June issue of the ‘Aerospace Testing International’ magazine: http://www.aerospacetestinginternational.com/latest_issue.php.

The article is about the continued wind tunnel work we are doing with Jack Gilbert and GDJ Inc.

Cool Video

You know how google places all those topic relevant ads around your gmail inbox? Well, this video suggests that searches are also being targeted based on your browsing history.

http://www.ted.com/talks/eli_pariser_beware_online_filter_bubbles.html

Is this the same as Fox versus NPR news?

Thanks for reading!

Jim Campbell
jac@viewpointusa.com

Part 3: How to Architect an Embedded Systems Application

Continuing with the theme of embedded applications, this month will review the framework used for most embedded system applications using NI RIO hardware. Next month, we’ll wrap up with a closer look at some Reference Designs for inter-process communications.

An application based on the RIO platform has three components: FPGA, RT, and Client PC. We need to connect them all so data and status is available where it’s needed. How should it all go together? By the way, this architecture is also useful for any LabVIEW RT app connected to a client PC. Read on...

 

Motion Pictures Break into a Gallop

Eadweard Muybridge (pronounced "my bridge") produced a series of photographs capturing “The Horse in motion” at Palo Alto track, 19 June 1878. Railroad magnate and California governor Leland Stanford commissioned Muybridge to shoot photographic evidence to show that horses that are galloping completely lift all four hooves off the ground.

Muybridge arranged 24 cameras along a track parallel to the horse's path. Trip wires placed in the path of the horse, Sallie Gardner, and jockey, Doom triggered the cameras. The motion picture showed a horse galloping at 1:40 gait would lift all four hooves off the ground at the same time. The pictures and their display device, the zoopraxiscope, helped lead the way for future motion picture development.

http://www.loc.gov/pictures/resource/cph.3a45870/

http://news.stanford.edu/news/2003/february12/muybridge-212.html

 


To register, visit ni.com/training
or call 585-475-9555.

LabVIEW Core
Core 1
3 days, Sept 12 - Sept 14, 2011
$1799

Core 2
2 days, Sept 15 - Sept 16, 2011
$1199

RF Fundamentals
2 days, Oct 3 - Oct 4, 2011
$1499

RF Applications
3 days, Oct 5 - Oct 7, 2011
$2099
LabVIEW - Formerly Intermediate I and II
Core 3
3 days, Oct 17 - Oct 19, 2011
$1799

Connectivity
2 days, Oct 20 - Oct 21, 2011
$1199
TestStand
I: Introduction
3 days, Oct 24 - Oct 26, 2011
$2099

II: Customization
2 days, Oct 27 - Oct 28, 2011
$1499
All classes are held at Viewpoint’s Certified Training Center in Rochester.

Don’t see a course listed here?
Call 585-475-9555 or review our complete training schedule to learn about other courses offered by National Instruments and Viewpoint Systems. Viewpoint can also custom tailor a training course to meet your company needs.



About Viewpoint Systems
We are consultants, designers, and builders of custom automated product test platforms for design validation, reliability, manufacturing and data management.

Viewpoint is dedicated to increasing the competitive advantage of our regional product design and manufacturing community in a global economy.




Newsletter Staff:
Editor-In-Chief: James Campbell
Associate Editor: Sunny Teumim




© 2011 Viewpoint Systems, Inc.
All rights reserved.

Product and company names listed are trademarks or trade names of their respective companies.