Click to view this message in a browser

Notes from the EditorGreetings,

Welcome to the official month of the beginning of Fall! (At least for those in the Northern Hemisphere, I was corrected.) The Fall equinox is only a few days away and marks the time when nights are now longer than days. I hope everyone had a wonderful summer. For those of us that like winter sports, it’s time to get out those skis, boards, sleds, shoes, skates, and other Winter paraphernalia!

Seminars

It is also seminar season. Viewpoint will have a booth at several upcoming NITS (National Instruments Technical Symposium) events in Rochester, Pittsburgh, and Toronto. Check out the link http://www.ni.com/techsym/ for details.

Upcoming TestStand Training

We have a few more spots available for anyone interested in TestStand training. The TestStand I: Introduction class runs from Oct 04-Oct 06 and the TestStand II: Customization class runs from Oct 07-Oct 08. For the Introduction course, see http://sine.ni.com/nips/cds/view/p/lang/en/nid/2297 and for the Customization course, see http://sine.ni.com/nips/cds/view/p/lang/en/nid/5508. For help registering, call Carol Scheuer at 585.475.9559 x110.

Cool Videos

Ever wondered what mass production looked like at Ford’s early assembly plants? Watch Model Ts come off the line in this video. Wait until the end and see how these Model Ts can maneuver almost as well as a Humvee. I thought this video a great example to show how far we’ve come with automobiles and automation: Autos and Automation.

Thanks for reading!

Jim Campbell
jac@viewpointusa.com

Test Variations by Test Operators  

Last month’s article discussed the cost of being unaware of the accuracy of test equipment and the potential to pass failing units as well as fail passing units. Enormous costs can occur while debugging a passing unit and the lost revenue, customer perception, and logistics costs of sending a failing unit to the field.

Test equipment variations are one part of the overall variability of a test system. The Test Operator also causes variability. So, this month, with the help of our guest contributor, Ken Samuelson, we list 4 reasons why even an experienced Test Operator can affect the accuracy of test results. And, we list 4 ways you might consider to improve consistency. Read more...

 

Viewpoint Wins Golf Tournament  

Viewpoints Systems sponsors a team to play in a charity golf tournament each year and this year, Mercy Flight Central provided the opportunity. The tournament was held at Bristol Harbour Golf Resort, in Canandaigua,NY . The players…

Stuart McFarlane - VSI

David Philipson - VSI

Robert Grimm - VSI

Joe D’agostino - Guest

The Viewpoint Team finished at nine under par and took home first place this year. It was a true team effort with all players contributing at key times to keep the team on track. As usual, the event was a huge success and the view of the lake is always unparalleled. The team is already looking forward to next year!

 

The Space Shuttle Enterprise

On September 17, 1976, Enterprise rolled out of Rockwell's plant at Palmdale, California.

The Space Shuttle Enterprise was the first Space Shuttle orbiter built by NASA as part of the Space Shuttle program to perform test flights in the atmosphere.

Designated NASA Orbiter Vehicle OV-101, it was originally planned to be named Constitution. However, a write-in campaign lead to a renaming after the Starship Enterprise, featured on the television show Star Trek.

After the completion of much critical testing, NASA partially disassembled Enterprise to allow other shuttle to reuse certain components. Enterprise then underwent an international tour visiting France, Germany, Italy, the United Kingdom, Canada, and the U.S. states of California, Alabama, and Louisiana (during the 1984 Louisiana World Exposition)

Finally, on November 18, 1985, Enterprise was ferried to Washington, D.C., where it became property of the Smithsonian Institution. Enterprise currently resides at Smithsonian's Steven F. Udvar-Hazy Center at Dulles International Airport, as the centerpiece of the space collection.

Source: http://en.wikipedia.org/wiki/Space_Shuttle_Enterprise

 


To register, visit ni.com/training
or call 585-475-9555.

RF Fundamentals
3 days, Sept 27 - Sept 29, 2010
$2099

RF Applications Development
2 days, Sept 30 - Oct 1, 2010
$1499
LabVIEW TestStand
TestStand I: Introduction
3 days, Oct 4 - Oct 6, 2010
$2099

TestStand II: Customization
2 days, Oct 7 - Oct 8, 2010
$1499
LabVIEW - Formerly Intermediate I and II
Core 3
3 days, Oct 18 - Oct 20, 2010
$1799

Connectivity
2 days, Oct 21 - Oct 22, 2010
$1199
LabVIEW Core
Core 1
3 days, Nov 1- Nov 3, 2010
$1799

Core 2
2 days, Nov 4 - Nov 5, 2010
$1199
LabVIEW Real-Time
3 days, Nov 15 - Nov 17, 2010
$1799

LabVIEW FPGA
2 days, Nov 18 - Nov 19, 2010
$1199
LabVIEW Machine Vision
2 days, Nov 30 - Dec 1, 2010
$1199
All classes are held at Viewpoint’s Certified Training Center in Rochester.

Don’t see a course listed here?
Call 585-475-9555 or review our complete training schedule to learn about other courses offered by National Instruments and Viewpoint Systems. Viewpoint can also custom tailor a training course to meet your company needs.



About Viewpoint Systems
We are consultants, designers, and builders of custom automated product test platforms for design validation, reliability, manufacturing and data management.

Viewpoint is dedicated to increasing the competitive advantage of our regional product design and manufacturing community in a global economy.




Newsletter Staff:
Editor-In-Chief: James Campbell
Senior Editor: Benjamin Hysell
Associate Editor: Sunny Teumim




© 2010 Viewpoint Systems, Inc.
All rights reserved.

Product and company names listed are trademarks or trade names of their respective companies.