Click to view this message in a browser

Notes from the EditorGreetings,

NI Technical Symposium

Viewpoint will have a booth at the Toronto event on November 16. Stop by and discuss with us our latest capabilities and solutions in LabVIEW real-time and FPGA as well as our product data management platform.

If you have not already registered please use this link Toronto NITS. We hope to see you there.

Oops!

Apparently, some people who tried to download the ZIP file for the Gauge R&R VIs and data files had trouble. So, I apologize for the inconvenience and we are trying again. Here’s the link:Gauge R&R VIs.

If you are still having problems, please email me directly and I’ll make sure myself that you receive the ZIP file.

Cool Videos

Not only is this an interesting lesson for engineers, but the presentation style is fascinating too. Check out: http://www.youtube.com/watch?v=u6XAPnuFjJc

Thanks for reading!

Jim Campbell
jac@viewpointusa.com

Testing the Test System  

Those IT and web development programmers have it easy. Pure software applications are easier to test than a Test System. OK, I might be exaggerating, but the hardware involved in a Test System complicates the usual techniques utilized in software validation. When we deliver a Test System, we have to validate both the software AND the hardware.

In months past, we’ve shown you how to check the accuracy of the Test System hardware. Now, you need to verify that all the measurements are being collected, analyzed, and reported properly in the right sequence at the right time. This verification involves the application software, the unit under test (UUT), and all the measurement hardware as well.

Here are 6 tips to help you deliver a properly functioning Test System. Read on...

 

Windows 1.0

On November 10, 1983, Microsoft first presented Windows OS to the public. During an elaborate event at New York City's posh Helmsley Palace Hotel, Bill Gates (Microsoft's president and board chairman at the time) promised a user-friendly interface of tiled windows and dropdown menus that supported the use of a mouse and device-independent graphics. Windows OS could run several applications at the same time and even get them to interact. After announcing that the OS would ship in April 1984, Gates predicted it would be running on 90% of all IBM-compatible computers by the end of 1984. Actual numbers fell far short of his prediction. By the end of 1984, there were no computers running Windows OS. Windows 1.0 finally debuted two years later on November 20, 1985.

Wikipedia Windows 1.0

Google Books - Hard drive: Bill Gates and the making of the Microsoft empire

 


To register, visit ni.com/training
or call 585-475-9555.

LabVIEW Real-Time
3 days, Nov 15 - Nov 17, 2010
$1799

LabVIEW FPGA
2 days, Nov 18 - Nov 19, 2010
$1199
LabVIEW Machine Vision
2 days, Nov 30 - Dec 1, 2010
$1199
LabVIEW Core
Core 1
3 days, Dec 6 - Dec 8, 2010
$1799

Core 2
2 days, Dec 9 - Dec 10, 2010
$1199
All classes are held at Viewpoint’s Certified Training Center in Rochester.

Don’t see a course listed here?
Call 585-475-9555 or review our complete training schedule to learn about other courses offered by National Instruments and Viewpoint Systems. Viewpoint can also custom tailor a training course to meet your company needs.



About Viewpoint Systems
We are consultants, designers, and builders of custom automated product test platforms for design validation, reliability, manufacturing and data management.

Viewpoint is dedicated to increasing the competitive advantage of our regional product design and manufacturing community in a global economy.




Newsletter Staff:
Editor-In-Chief: James Campbell
Associate Editor: Sunny Teumim




© 2010 Viewpoint Systems, Inc.
All rights reserved.

Product and company names listed are trademarks or trade names of their respective companies.